IR infrared Lens C/D cell Maglite Improves the image received by night goggles

Description

This is by far the best IR Lens that I offer in my store, much better than the Plastic films sold on the elsewhere. A Optically pure quality infrared lens like this retails for up to .00.
This is A quality manufactured product here is the USA. If you buy from me, you are buying a professionally made quality product.
2"  (2 inches) in Diameter to fit both Maglite C and D Maglite's.
This is a
MAGLITE Flashlight Infrared IR Filter For Covert Night Vision, Ghost Hunting, or for just plain old night time fun when used with Infrared Goggles or Monocle.
Maglite Flashlight is not included.
Includes One 1/16" Thick Dark Infrared Filter-Precision Laser Cut Lens. The Lenses have polished edges and are perfectly round and designed to precisely fit into the bezel of your C or D Maglite flashlight.
There may be a thin protective film on the lens on one side or on both sides that will need to be peeled off.
This Lens system has been tested under strict infrared quality control measures using state of the art infrared imaging instrumentation.
The Light is not visible and  is infrared spectrum and has been tested with infrared instrumentation.
DO NOT LOOK INTO THE FLASHLIGHT.
-Maglite IR (infrared) lens ; for use with night vision equipment; Fits Maglite C and D-cell flashlights
-Features of my Maglite Covert Lens are:
IR (infrared) Covert Lens assembly for C & D-cell Maglites
• IR, infrared lens- for use with covert night vision equipment
• blocks 99.9% of visible light
• Fits Maglite C-cell and D-cell flashlights and works only with an incandescent bulb only--Wil not work with LED since most LEDS for flashlights do not emit infrared.
Note: Spare Incandescent lamp is included in new C and D Maglites and is secured inside the tailcap.
Unscrew the tail cap from the Mini Maglite flashlight while holding it so that the lens is pointing at a table. Set the body of the flashlight aside, being careful not to dump the batteries out.
Flip the tail cap of the flashlight over so that the battery contact, t
he spring in the cap will be facing up. Grasp the spring and gently twist and pull it away from the tail cap. Don't toss any parts, you still need themGently grasp the replacement bulb (usually wraped in foam) in the tail cap and pull it straight out of the tail cap. Now that the bulb is loose and it is ready for installation into the Maglite.
If you don't know how to replace and remove the bulb see your Maglite instructions or Maglite Website.
To install simply unscrew the bezel and remove the clear plastic lens, set it aside..you may want to keep it.
Install the the New IR filter, simply screw the bezel back on to the flashlight.
IMPORTANT: Never look into the lens inside the flashlight directly with the flashlight on, IR Light can damage your eyes.
• One Plastic lens that make up the IR filter assembly
• Block 99.9% Visible Light for Covert Activity
• IR Output Improves Visibility of Night Vision Devices
Precision Laser cut Lens
• IR, infrared lens – for use with night vision equipment
• Blocks 99-100% of visible light
• Fits Maglite D-cell flashlights
• made in the USA
Lenses block 99-100% of the visible light from Maglite flashlights allowing for a maximum of Infra-Red output while remaining extremely covert. These lenses tremendously improve the image received by night vision goggles, Starlight, Infra Red and night vision scopes without showing your light source.